ft 60 manual

Your FT-60R has been configured, at the factory, for the repeater shifts customary in your country. For the 144 MHz band shift will be 600 kHz; on the 430 MHz band, the shift may be 1.6 MHz, 7.6 MHz, or 5 MHz (USA version). See page 75. FT-60R O EPEATER PERATION. When “TSQL” is displayed, this means that the Tone SQueLch system is active, which mutes your FT-60R’s receiver until it receives a call from another radio sending out a matching CTCSS tone. This can help keep your radio quiet until a specific call is received, which may be helpful while operating in congested areas of the band. Your repeater system may be configured for DCS;. Tone Scanning works either in the VFO or Memory modes. PERATION DCS O ” will appear on the display; in the case of DCS, FT-60R O. Once access to the repeater has been gained, you may release the MONI key, and use the PTT key for activating the transmitter thereafter.Whenever you recall a memory which contains inde- pendently-stored transmit and receive frequencies, the “ ” indication will appear in the display. FT-60R O. If a Split Frequency Memory channel was transferred, the TX frequency will be ignored (you will be set up for Simplex operation on the Receive frequency). FT-60R O. Fortunately, the FT-60R includes provision for dividing the memories into as many as ten Memory Groups, so you can categorize the memories in a manner convenient to you. See page 39 for details regarding activation of this mode. FT-60R O U. S. V 162.550 MHz 162.500 MHz. It will halt on signals encountered, so you can talk to the station(s) on that frequency, if you like. Scanning operation is basically the same in each of the above modes. Before you begin, take a moment to select the way in which you would like the scanner to resume scanning after it halts on a signal. If you want to change direction of the scan while it is underway, rotate the DIAL knob one click in the opposite direction (in this case, one click counter-clockwise).

• ft 60 manual, ft-60 manual pdf, ft-60r yaesu manual, yaesu ft 60 manual pdf, ft-60 service manual, yaesu ft 60 manual user, beurer thermometer ft 60 manual, yaesu ft-60 service manual, ft-60 specifications, beurer ft 60 manual, ft 60 manual, ft 60 manual, ft 60 manual pdf, ft 60 manual, ft 60 manual pdf, yaesu ft 60 manual, yaesu ft 60 manual pdf, yaesu ft 60 manual download.

Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U.K. Availability of accessories may vary. Some accessories are supplied as standard per local requirements, while others may be unavailable in some regions. Consult your Yaesu dealer for details regarding these and any newly-available options. Connection of any non-Yaesu- approved accessory, should it cause damage, may void the Limited Warranty on this ap- paratus. Microphone The internal microphone is located here. Keypad These 16 keys select many of most important operating features on the FT-60R. The func- tions of the keys are described in detail on the pages to follow. FT-60R O. See page 74 for details.CCESSORIES FNB-83 B FT-60R O Close the Battery Pack Latch. FT-60R O NSTALLATION OF EXT DC jack. The input level to the FT-60R from the TNC should be adjusted at the TNC side; the optimum input voltage is approximately 5 mV at 2000 Ohms. I know you’re anxious to get on the air, but I encour- age you to read the “Operation” section of this manual as thoroughly as possible, so you’ll get the most out of this fantastic new transceiver. The FT-60R will initially be operating in the “VFO” mode, a channelized system which allows free tuning throughout the currently-selected operating band. Three basic frequency navigation methods are available on the FT-60R:. The FT-60R will then hold on that frequency according to the setting of the “RESUME” mode (Set Mode Item 34: RESUME). Press the PTT switch momentarily to cancel the scanning. These are the most basic steps; more advanced aspects of transmitter operation will be discussed later. In order to prevent accidental frequency change or inadvertent transmission, various as- pects of the FT-60R’s DIAL and keypad may be locked out. The possible lockout combi-. The reddish illumination yields clear viewing of the display in a dark environment, with mini- mal degradation of your night vision. Three options for activating the lamp are provided:.

KEY: The beeper sounds when you press any key. OFF: Beeper is disabled.See page 44 for details.ONLY: The scanner will only scan channels that are flagged (Preferential Scan List). OFF: All memory channels will be scanned (the “flag” will be ignored). FT-60R O. FT-60R O CTCSS TONE FREQUENCY ( Hz ) 67.0 69.3 71.9 74.4. The receiver IF filter bandwidth is not changed via this setting.Frequency ranges will vary according to transceiver version; check with your dealer.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference including received, interference that may cause undesired operation. No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD. 0406x-0X. The Polar H1 heart rate sensor transmits the heart rate signal to the training computer. The heart rate sensor consists of a connector and a strap.CAL, otherwise they are shown as KCAL. CaloriesEnter Weight. Enter Height. Enter Date of birth. Select Sex. Settings OK? is displayed.Select No if you want to change the settings. Please enter basic settings is displayed. Re-enter your basic settings.The alarm is active. Sounds are off. Time 2 is in use. Number two is displayed at the lower right corner of the display. You have one or more new messages. The button lock is active. The footpod is in use. If the symbol is blinking, the FT60 is trying to establish aThe GPS sensor is in use. If the symbol is blinking, the FT60 is trying to establish aGPS sensor is trying to establish a connection. The redirection is based on the geo-localization of your browser. You can still change the store. You can still change the store. Pickup is possible with prior arrangement.Pickup is possible with prior arrangement. To say comes with an Operating Manual that is about seen such manuals other languages. Well, in this case, it was all in English and all important. That is a lot to absorb.

These channels are designated by a blinking “ ” icon when you have selected them, one by one, for the Preferential Scan List. When the Weather Alert Scan feature is engaged, the FT-60R will check the Weather Broadcast Memory Channels for activity every five seconds while scanning. If you watch. This yields a long period of monitoring time, as no power will be consumed via audio output while scanning for the Alert Tone is in progress. The FT-60R will automatically “beep” when a band edge is encountered during scanning (either in standard VFO scanning or during PMS operation). You may also enable this feature (band edge beeper) to operate when the frequency reaches the band edge while tuning using the DIAL knob. See page 29 for details on setting the Home channel.You don’t need to spend hours looking up repeater frequencies from a reference guide- book...just ask your FT-60R where the action is.Details may be found at the WIRES-II Web site: To do this, repeat steps 1- 7 above, then press the MONI switch.See page 71 for details.When the password feature is activated, the radio will ask for the four digit password to be entered when the radio is first turned on. These may be changed by the user, if you wish to assign another Set Mode Item to either or both of these keys. However, should an unusual operating situation arise in which you need to change between the available operating modes (FM and AM), here is the proce- dure for doing so: 1. If somebody is talking on the channel, the FT-60R will remain in the “active” mode, then resume its “sleep”. F7 U-ONLY: The FT-60R will operate on the 430 MHz band only. F3 MB RST: Clears the Memory Bank Assignments.This can be particularly useful when configuring a number of transceivers for a public service opera- tion. It may be used for configuration of a wide variety of transceiver param- eters, some of which have not been detailed previously. Use the following procedure to activate the Set Mode: 1.

We may receive commission if your application for credit is successful. All Rights Reserved. User Agreement, Privacy, Cookies and AdChoice Norton Secured - powered by Verisign. Please do not offer the downloaded file for sell only use it for personal usage. Looking for other manual? For this no need registration. May be help you to repair. You could suffer a fatal electrical shock. Instead, contact your nearest service center. Note! To open downloaded files you need acrobat reader or similar pdf reader program. In addition, Also some files are djvu so you need djvu viewer to open them. These free programs can be found on this page: needed progs If you use opera you have to disable opera turbo function to download file. If you cannot download this file, try it with CHROME or FIREFOX browser. Translate this page: Relevant OTHER forum topics: yaesu FYG-3u hasznalata sziasztok.Csaba. Tudna valaki segiteni Yaesu FTL-7002 tip. URH ado-vevo mukodesi tartomanyanak a boviteseban. Nem talalok anyagot hozza.Most 450-490Mhz kozott mukodik, de nekem 430-450Mhz-ig kellene. Ha tud valaki segiteni megkoszonom. Udv:pandora Similar manuals: You can write in English language into the forum (not only in Hungarian). Our name stands for high-quality and exhaustively tested products from the areas of warmth, gentle therapy, blood pressure, body temperature, weight, massage and air. Please read these instructions for use carefully and follow the directions. Yours faithfully, The Beurer Team Please treat it carefully and do not expose it to any mechanical impacts. Do not expose the thermometer to direct sunlight. The FT60 thermometer is only designed for the measuring area on the human body stated in the instructions for use. The device should be in the room in which the measurement is made for at least 30 minutes before use. The thermometer is NOT waterproof. For this reason, direct contact with water or other liquids should be avoided.

This And who knows, maybe some beginner out there will find value in i Please send me your comments, corrections, and question. This guide will help me learn. And who knows, maybe some beginner out there will find value in it too. I guess eating their food would not inform you of the fact. Nothing is simple or easy if you don't know what to do. This might be the most useful part of the Beginner's Guide. I guess eating their Nothing is simple or This might be. Learn more - opens in a new window or tab This amount is subject to change until you make payment. For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab This amount is subject to change until you make payment. If you reside in an EU member state besides UK, import VAT on this purchase is not recoverable. For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or an item that has been returned to the seller after a period of use. See the seller’s listing for full details and description of any imperfections. You're covered by the eBay Money Back Guarantee if you receive an item that is not as described in the listing. Find out more about your rights as a buyer - opens in a new window or tab and exceptions - opens in a new window or tab. Contact the seller - opens in a new window or tab and request post to your location. Please enter a valid postcode. Please enter a number less than or equal to 1. We may receive commission if your application for credit is successful. Terms and conditions apply. Subject to credit approval.

The LED does not support any requests for stored measured values. If you continue to hold down the “ POWER ”, you will enter a special measuring mode, in which the thermometer will not make a correct measurement. In this event, allow the thermometer to switch off automatically after about 1 minute and then switch it on again. With the thermometer switched on (standard forehead thermometer mode) keep the “ ” button depressed and at the same time press the “ SCAN ” button. This mode is indicated with the symbol. If you keep the “ SCAN ” button depressed, the surface temperature measured is continuously displayed. You can apply the sensor tip directly to the surface to be measured or measure at close range (do not immerse in liquids). Note that the temperature displayed is the surface temperature measured but not adjusted. It cannot be compared with the forehead temperature. This mode is identified by the symbol and the ambient temperature is shown continuously. If you want to use the thermometer to measure the ambient temperature, it should be positioned so that the measurement is not influenced by solar radiation or other influences such as cold draughts from air-conditioning systems. In addition to the ambient temperature, which is updated once every minute, the date and time are displayed alternately. With the thermometer switched off or in standby mode, select the unit by holding down the “SCAN” button and at the same time pressing the “ ” button. Keep the two buttons depressed until the temperature unit changes. All stored temperatures are displayed in the new temperature unit. Use a clean cloth or cotton bud that can be moistened with disinfectant, alcohol or warm water. To clean the entire device, use a soft cloth slightly moistened with a mild soapy solution. Water must never get into the device. If water gets into the device, remove the battery immediately. Only use the device again when it is completely dry. Do not use any harsh cleaning agents.

Never immerse the device in water. Always store the thermometer with the cap on in order to protect the sensor. The device must not be stored or used at too high or low a temperature or humidity (see 9. technical data), in sunlight, in association with an electrical current or in dusty locations. Otherwise, inaccuracies can occur. If prolonged storage is intended, you should remove the battery. If you have any queries, please refer to the local authorities responsible for waste disposal. We reserve the right to make technical changes to improve and develop the product. Post in the comments. Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Yaesu FT-60R owners to properly answer your question. Ask a question About the Yaesu FT-60R This manual comes under the category Not categorized and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Yaesu FT-60R or do you need help. Ask your question here Yaesu FT-60R specifications ManualSearcher.com ensures that you will find the manual you are looking for in no time. Our database contains more than 1 million PDF manuals from more than 10,000 brands. Every day we add the latest manuals so that you will always find the product you are looking for. It's very simple: just type the brand name and the type of product in the search bar and you can instantly view the manual of your choice online for free. ManualSearcher. com If you continue to use this site we will assume that you are happy with it. Read more Ok. Shop Online and Parts Ship Today. Call us at 1-800- 458-5593 Find Groen manuals at Parts Town. Call 800-458-5593 Not to worry, partstown.com is ready to help. Please place this order and all future international orders there.Thank you.

Clean the measuring tip after each use with a soft cloth moistened with disinfectant. Check before each use that the lens is intact. If it is damaged, please contact the dealer or service address. The thermometer was constructed for practical use but cannot replace a visit to the doctor. This device is not intended for commercial or clinical use. The device is intended only for the purpose given in these directions for use. Repairs must be carried out only by authorised service agents. Otherwise the guarantee becomes void. This device complies with ASTM E 1965-98. This unit is in line with European Standard EN60601-1-2 and is subject to particular precautions with regard to electromagnetic compatibility (EMC). Please note that portable and mobile HF communication systems may interfere with this unit. For more details, please contact customer service at the address indicated. If you have further questions about using our devices, please contact your dealer or Customer Service. Please read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain. The temperature varies depending on the part of the body where the measurement is taken.You should therefore tell your doctor or bear in mind if you are diagnosing yourself what thermometer you used to take your temperature and in what part of the body. Age (body temperature is higher in babies and small children and falls with increasing age. Greater temperature fluctuations occur faster and more often in children). Clothing. The outside temperature. The time of day (body temperature is lower in the morning and increases during the day towards evening). Preceding physical and, to a lesser extent, mental activity. If you are uncertain about interpreting the results or if the result is abnormal (e.g. fever), you should consult your doctor.

This also applies in the case of slight temperature changes if there are other symptoms of illness such as agitation, severe sweating, flushed skin, fast pulse rate, tendency to collapse etc. After a short self-test and two short beep tones, the thermometer is ready for forehead temperature measurement. Confi rm the values set in each case with the “ ” button. 5.2 Batteries The Type 3V CR2032 battery is already fi tted and depending on usage has a life of around 3000 measurements. When the battery gets weak, the battery warning symbol appears. It is still possible to measure the temperature. Battery must be replaced. When the battery symbol fl ashes, the battery must be exchanged by sliding the battery compartment cover off to the rear. Switch off the device, press the batttery compartment lock with a sharp object and slide the battery compartment cover downwards at the same time. Close the battery compartment cover again. Used batteries should not go into domestic refuse. You are legally obliged to dispose of the batteries correctly. Dispose of them through your electrical dealer or local recycling centre. The battery in this device does not contain toxic substances. Switch on the thermometer with the “ ” button. This is indicated by the symbol.Move the thermometer to and over the temple. During the measurement you can hear short beeps signalling that the thermometer has found a new maximum temperature. The end of the measuring time is signalled with a long beep. Release the “SCAN” button. You can now read off the temperature measured. The measurement normally takes from 5 to 8 seconds, but can take up to 30 seconds. The thermometer signals with two short beeps and a no longer flashing forehead symbol that the thermometer is ready for a new measurement. There are 9 memory locations available for this. You can call up the last temperature measured with the “ POWER ” button. The date and time are also shown.

The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction. Therefore, in an instruction of Beurer FT60 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities.A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Beurer FT60, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Beurer service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Beurer FT60. After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid. It has a tendency to brick the digital side of the radio. Keith MorrisIt has a tendency to brick the digital side of the radio. Keith MorrisI use the FT-60 to switch programs between RT and CHIRP.

If I have on radio that uses CHIRP and another different model that uses RT, then the 60 can be used to transferI use the FT-60 to switch programs between RT and CHIRP. If I have on radio that uses CHIRP and another different model that uses RT, then the 60 can be used to transfer But, their stuff is 100% NOT accessible.But, their stuff is 100% NOT accessible. Steps are quite easy. Connect radio, do a read, then import the common file, then do a write back to the radio. This coupledSteps are quite easy. This coupled I have long petitioned them to work out a scheme whereby we managed a single database of frequencies, and then buy (for the same price if they want) the radio-specific read-write bits.I have long petitioned them to work out a scheme whereby we managed a single database of frequencies, and then buy (for the same price if they want) the radio-specific read-write bits. If it's any consolation, The FT-60 cable does work on the VX-3R!If it's any consolation, The FT-60 cable does work on the VX-3R!Does anyone know if the RT systems cable for the FT-60R will work with an FT-70D? I just acquired a used Yaesu FT-70D. I already have a Yaesu FT-60R and the programming cable for it andDoes anyone know if the RT systems cable for the FT-60R will work with an FT-70D? I already have a Yaesu FT-60R and the programming cable for it and Great news, btw. Christian KD2LiNGreat news, btw. Christian KD2LiN The original battery is rated at 1400 mAh, the Amazon battery rated at 1800 mAhThe original battery is rated at 1400 mAh, the Amazon battery rated at 1800 mAh When I win the lottery, one of my first tasks will be to commission Kenwood to tool-up and make aWhen I win the lottery, one of my first tasks will be to commission Kenwood to tool-up and make a Thanks for the really quick reply.:). Well, in the case of the FT-60, it's a lot of memorization, since the radio doesn't talk.

The FT-70 is worse, those menus wrap around, so good luck knowingThanks for the really quick reply.:). The FT-70 is worse, those menus wrap around, so good luck knowing First off props to you and all vision-impaired amateur operators. I don't know how you do it, but some of the best QSOs in my years as a ham have been with hams from whom I learnedFirst off props to you and all vision-impaired amateur operators. I don't know how you do it, but some of the best QSOs in my years as a ham have been with hams from whom I learned I'm blind, so I have no idea what is happening on the display. I'll probably have to make a video of this with my iPhone for you guys to diagnose. But, I'll try describing the issueI'm blind, so I have no idea what is happening on the display. But, I'll try describing the issue The Group moderators are responsible for maintaining their community and can address these issues. This includes: harm to minors, violence or threats, harassment or privacy invasion, impersonation or misrepresentation, fraud or phishing. Any issues with signup please use Contact Us button at bottom of any page. The first posts you make on the forum will be moderated.To start viewing messages,Does anyone know where I can download the original manual? ThanksDoes anyone know where I can download the original manual? Thanks. We recommend you upgrade to a newer version of Internet Explorer or switch to a browser like Firefox or Chrome. Seems to be a direct replacement for the FT-50.Probably not for the faint of heart.The character looks like an under case u. If you operate on one of the two bands most of the time, you can purchase a single-band antenna designed for the VX-800 commercial radio. Check out Multec Communications and scroll all the way down to the antenna section.

The advantage of these antennas is that they have the rubber jacket present on the stock anttena that fits down below the actual SMA connector on the radio, which provides for a professional look (not to mention being water-proofed). Unfortunately if you want to tune in an amateur repeater in the 927MHz band, you're out of luck. To find out more about the cookies we use and how to control them, please visit our privacy, cookies and data protection page. The main contactor by-passes the autotransformer after a short acceleration time and applies full voltage to the motor terminals. Starting line current is 47% of the across-the-line starting inrush. Laminated three-page foldout pocket guide, the size of a credit card for easy carrying in a wallet or purse. High quality printing on both sides. An essential operating accessory!Press the Add to Cart button below to purchase. Set for a repeater with a 100.0 Hz tone. Set the squelch type (SQL.TYP: TONE). Set the repeater tone (TN FRQ: 100.0HZ). Turn the selector knob to 17. Momentarily press. Force the radio to simplex (RPT: RPT.OFF). Set the channel name (NM WRT). We provide a business services platform, with a scalable architecture that allows us to integrate our clients' business processes with their business vision. English-fluency and time zone alignment make seamless communication possible. Ready to talk to someone else. Contact us and our team will reach out to you! The thermometer signals with two short beeps and a no longer ?ashing forehead symbol that the thermometer is ready for a new measurement. 6.2 Saving the temperatures measured The temperature last measured, i.e. only the last temperature of a series measured, is saved automatically as soon as the thermometer is switched off. There are 9 memory locations available for this. You can call up the last temperature measured with the “ ” button.

If you continue to hold down the “ ”, you will enter a special measu- ring mode, in which the thermometer will not make a correct measurement. In this event, allow the thermometer to switch off automatically after about 1 minute and then switch it on again. 6.3 Surface temperatures When you want to measure surface temperatures with this infrared thermometer, you must change to the “SCAN” mode. With the thermometer switched on (standard forehead thermometer mode) keep the “ ” button depressed and at the same time press the “SCAN” button. If you keep the “SCAN” button de- pressed, the surface temperature measured is continuously displayed. It cannot be compared with the forehead temperature. 6.4 Ambient temperature After the measurement, the thermometer automatically switches to standby mode after about 1 minute, but only if the time has been set. This mode is identi?ed by the symbol and the ambient temperature is shown continuously. If you want to use the thermometer to measure the ambient temperature, it should be positioned so that the measurement We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share. Note that email addresses and full names are not considered private information. Please mention this; Therefore, avoid filling in personal details. The manual is 0,93 mb in size. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive. Check your email Please enter your email address.